济南蓬发建材有限公司为您提供临边护栏、木工防护栏、工程围挡等相关信息发布和相关资讯,敬请关注!
联系我们
咨询电话
139 6412 5269

联系:张经理

手机: 139 6412 5269

邮箱: 394441862@qq.com

网址:http://www.jnpfjc.com/

地址:山东省济南市章丘圣井工业园

当前位置: 首页 > 新闻中心 > 常见问题 >

临边护栏常用防护栏以及使用要求

来源:http://www.jnpfjc.com/   发布时间:2022-10-27

临边护栏的种类也是很多的,很多人在购买的过程中不是很了解,那么临边护栏常用防护栏有哪些?接下来临边护栏栏厂家就来为大家介绍有关于这方面的内容,一起跟着这篇文章来了解一下。
There are also many types of edge guardrails. Many people do not know about them during the purchase process. What are the common guardrails for edge guardrails? Next, the manufacturer of edge guardrail will introduce the content of this aspect to you, and follow this article to learn about it.
临边护栏常用防护栏
Common guardrails for edge guardrails
网片型基坑护栏网丝的直径通常3mm的镀锌丝,网孔大小为50*50mm,立柱为50*50mm,边框为20*20mm,下部挡脚板的宽度在150-200mm之间,连接件(耳朵)常用尺寸50*50mm,厚度3mm。底盘常用尺寸120*120mm,厚度4mm。框网和立柱之间使用专用螺丝进行固定,底盘与地面使用8*80或10*80膨胀螺丝固定。
The diameter of the mesh wire of the mesh type foundation pit guardrail is generally 3mm galvanized wire, the mesh size is 50 * 50mm, the column is 50 * 50mm, the frame is 20 * 20mm, the width of the lower toe board is 150-200mm, the common size of the connector (ear) is 50 * 50mm, and the thickness is 3mm. The common size of chassis is 120 * 120mm, and the thickness is 4mm. Special screws are used to fix the frame mesh and the column, and 8 * 80 or 10 * 80 expansion screws are used to fix the chassis and the ground.
栏杆型基坑护栏是用边框20*30mm的方钢与内竖管20*20mm的方钢焊接而成,立柱常用搭配规格为40*40mm或50*50mm方钢。
The railing type foundation pit guardrail is welded with 20 * 30mm square steel of the frame and 20 * 20mm square steel of the inner riser. The commonly used specification of the column is 40 * 40mm or 50 * 50mm square steel.
临边护栏常用防护栏类型有哪些?临边护栏常用防护栏类型解析
What types of guardrails are commonly used for edge guardrails? Analysis of Common Types of Side Guardrails
临边护栏栏使用要求:
Requirements for use of edge guardrails:
一、临边护栏栏需采用工具化和定型化,规格尺寸以及连接方式应符合相关要求。
1、 The edge guardrails shall be toolized and stereotyped, and the specifications, dimensions and connection methods shall meet the relevant requirements.
二、防护栏由上下横杆、边框以及内竖管或网片焊接而成,上杆离地1.1-1.2m,下杆离地0.5-0.6m,当横杆长度达到2m以上时,需要加设专用立柱。
2、 The protective fence is welded by upper and lower cross bars, frames and inner vertical pipes or meshes. The upper bar is 1.1-1.2m above the ground, and the lower bar is 0.5-0.6m above the ground. When the length of the cross bar reaches more than 2m, special columns need to be added.
临边护栏
三、防护栏需自上而下加设安全密网封闭,在栏杆下部应设置高度18cm以上的挡脚板,挡脚板刷红白或黑黄相间的条形警示漆。
3、 The protective fence shall be sealed with a safety net from top to bottom. A toe board with a height of more than 18cm shall be set at the lower part of the fence. The toe board shall be painted with red white or black yellow strip warning paint.
四、防护栏安装固定需牢固,栏面与横杆的连接应能承受来自任何方向1000N的外力冲击。
4、 The protective fence shall be firmly installed and fixed, and the connection between the fence surface and the crossbar shall be able to withstand 1000N external force impact from any direction.
五、在接料平台两侧使用时,需自上而下加挂安全密网。
5、 When used on both sides of the receiving platform, a safety net shall be hung from top to bottom.
六、当临边护栏使用在街道附近时,除防护栏杆外,敞口立面还需满挂安全密网作全封闭处理。
6、 When the edge guardrail is used near the street, in addition to the guardrail, the open facade shall also be fully enclosed with a safety net.
以上就是为大家介绍有关于临边护栏常用防护栏,希望对大家有所帮助。通过以上的介绍,相信大家对临边护栏栏有了更加深入的了解。关注我们http://www.jnpfjc.com为你了解更多事项!
The above is to introduce the commonly used guardrails for edge guardrails, hoping to help you. Through the above introduction, we believe that we have a more in-depth understanding of the edge guardrail. Follow us http://www.jnpfjc.com Learn more for you!