济南蓬发建材有限公司为您提供临边护栏、木工防护栏、工程围挡等相关信息发布和相关资讯,敬请关注!
联系我们
咨询电话
139 6412 5269

联系:张经理

手机: 139 6412 5269

邮箱: 394441862@qq.com

网址:http://www.jnpfjc.com/

地址:山东省济南市章丘圣井工业园

当前位置: 首页 > 新闻中心 > 公司新闻 >

建筑施工电梯加工棚的钢材选择

来源:http://www.jnpfjc.com/   发布时间:2021-11-29

建筑施工电梯加工棚的选择是钢材,也就是我们说的钢筋,才用的是双层防砸结构。
Construction of the elevator processing shed is the choice of steel, that is, we said the reinforcement, only the use of double-layer anti-smashing structure.
加工棚是由单一成品装配而成,用于建造电梯通道,采用全封闭防护,安全防护性能高,采用双层防护硬硬钢构板可有效缓冲高空跌落的冲击力,设置三面防护网隔离工人从电梯侧面险象环生,用国标钢材制作牢固耐用;
The processing shed is assembled from a single finished product and is used for building elevator passages. It is fully enclosed and has high safety and protection performance. The hard steel structure plate with double-layer protection can effectively cushion the impact of falling from height, set up a three-side protective net to isolate workers from the side of the elevator dangerous, with the National Standard Steel Production Firm and durable;
户外涂料采用360度自动烤漆,色彩鲜艳,不易褪色;
Outdoor paint with 360 degrees automatic paint, bright color, not fade;
警告脚线和标识字采用了全新的数控墨水印刷工艺,更整齐、美观、醒目;
warning foot line and logo using a new digital ink printing process, more neat, beautiful, eye-catching;
样式,颜色,大小多样,可根据客户需求定做;
style, color, size, can be customized according to customer needs; 
双防砸结构,标准化设计,全组合,快速组装,拆装简便,便于运输;
Double smash-proof structure, standardized design, full combination, quick assembly, easy disassembly and transportation;
加工棚是在施工现场对钢筋进行拉直、弯曲、焊接等钢筋加工的场所。普遍性的木工棚子的长和宽将根据加工钢筋的数量和所用机器的数量来确定加工棚的大小,一般情况有6*12 m、9*12 m、18*30 m等,可以根据需要。
The processing shed is in the construction site to carry on the straight, the bending, the welding and so on reinforcement processing place. The length and width of the universal woodworking shed will be determined according to the number of rebars processed and the number of machines used to determine the size of the shed, usually 6 * 12m, 9 * 12m, 18 * 30m, and so on, as required.
工程实际情况,自行设计长度和宽度尺寸。木工加工棚工作台的布置也要合理,根据实际钢筋加工流程,还有加工前期原料钢筋及加工结束后的成品存放,所以地面要在施工场地上30 cm以上,防止雨水浸泡,用脚在放置手管时,应采用横杆和斜撑,以确保加工棚的稳定。
Engineering practice, self-designed length and width dimensions. The layout of the worktable of the woodworking shed should also be reasonable. According to the actual reinforcement processing flow, there are also pre-processing raw reinforcement and finished products stored after processing. Therefore, the ground should be over 30 cm above the construction site to prevent the rain from soaking, when placing hand tubes with feet, cross bar and diagonal bracing shall be used to ensure the stability of the processing shed.