加工棚主要是应用在建筑工地上，像配电箱、钢筋、电梯、木工、搅拌机等都需要加工棚，是一种建筑工地上的防护措施。它的使用可以说是备受关注的，那么该加工棚的防护作用怎么样呢？

Processing shed is mainly used in construction sites, such as power distribution box, reinforcement, elevator, carpentry, mixer and so on. It is a protective and safety measure on construction sites. Its use can be said to have attracted much attention, so what is the protective effect of the processing shed?

加工棚是为了保护施工现场的施工人员，以钢管为支撑架，用竹签或竹条或废弃模板覆盖防砸，或通过加工棚保护高压线等.一般的双层保护是为了增加系数。

The processing shed is designed to protect the construction personnel on the construction site. The steel pipe is used as the support frame, covered with bamboo sticks or strips or waste formwork to prevent smashing, or the high-voltage line is protected through the processing shed The general double-layer protection is to increase the safety factor.

加工棚是施工时需要搭建的操作人员或人行通道，过往人员的加工棚需要双层。在悬臂式脚手架上，每隔十米设置一个悬臂式视频屏幕兜网，可以更好地保证人们在加工棚下行走的。在施工过程中，加工棚的施工需要注意防护措施，施工人员需要按施工要求进行施工。特别是在露天搅拌机场所、现场混凝土搅拌机、绞车棚、钢棚、木棚、一些出入口、现场厕所等，需要设置加工棚。

The processing shed is an operator or pedestrian passage that needs to be built during construction. The processing shed of passing personnel needs to be double-layer. On the cantilever scaffold, a cantilever video screen pocket net is set every ten meters, which can better ensure the safety of people walking under the processing shed. During the construction process, the construction of the processing shed needs to pay attention to safety protection measures, and the construction personnel need to carry out the construction according to the construction requirements. Especially in the open-air mixing airport, on-site concrete mixer, winch shed, steel shed, wood shed, some entrances and exits, on-site toilet, etc., processing shed needs to be set.

在安装和拆除水平保护装置之前，需要进行技术交底。高空作业人员需经过技术培训和考试，持证上岗。加工棚使用的钢管、紧固件等材料需符合相关标准的要求。在架设和拆除卧式加工大棚时，操作人员的“三宝”需要齐全并正确使用。

Safety technical disclosure is required before installing and removing horizontal protection devices. Personnel working at heights shall undergo professional technical training and professional examination and work with certificates. Steel pipes, fasteners and other materials used in the processing shed shall meet the requirements of relevant standards. When erecting and dismantling the horizontal safe processing shed, the "three safety treasures" of the operators need to be complete and used correctly.

加工棚架设和拆除时，应避免上下同时作业，作业时间要错开。搭建和拆除加工棚时，所有材料和工具应堆放在距建筑物外边缘少2m的范围内，堆放高度不应超过1m。拆下的材料需及时送到地面运走，严禁高空抛掷。

When erecting and dismantling the processing shed, simultaneous operation up and down shall be avoided, and the operation time shall be staggered. When building and dismantling the processing shed, all materials and tools shall be stacked at least 2m away from the outer edge of the building, and the stacking height shall not exceed 1m. The removed materials shall be transported to the ground in time, and it is strictly prohibited to throw them from high altitude.

建造和拆除加工棚时，应在地面设置警戒区，并派专人监控。建造和拆除加工棚时，应有专人指导。管理人员要保持眼睛、腿和嘴的勤勉，对危险情况采取有效的防护措施，确保人员。

When constructing and dismantling the processing shed, a warning area shall be set on the ground and a special person shall be assigned to monitor it. Special personnel shall be assigned to guide the construction and demolition of processing shed. Management personnel shall keep their eyes, legs and mouth diligent, and take effective safety protection measures for dangerous situations to ensure personnel safety.

阴雨大风天气，应暂停木工加工棚的搭建和拆除，并检查和维护加工棚的。加工大棚架设后，需经专职员验收合格后方可投入使用。在竖立和拆除水平保护之前，需要进行技术交底。

In rainy and windy weather, the construction and demolition of woodworking shed shall be suspended, and the safety of processing shed shall be inspected and maintained. After the erection of the processing shed, it can be put into use only after passing the acceptance of the full-time safety officer. Before erecting and removing horizontal protection, safety technical disclosure is required.

木工加工棚让工地防护作用更明显便是以上相关内容了，当然如果您有需求的话可以随时通过网站www.jnpfjc.com联系到我们，我们制作以及出售加工棚等相关产品！

The woodworking shed makes the protection of the construction site more obvious. Of course, if you need it, you can go to www.jnpfjc.com at any time Com contact us, we specialize in making and selling processing shed and other related products!