组装式钢筋加工棚和传统钢管防护棚的比照：钢筋加工棚符合出产标准化要求，定型组装和装置，配色，结构，可满意标准化要求。从际装置和运用，现已达到了感知的质量，而且能够彻底显示标准化而且好地作业。

Comparison between prefabricated steel bar processing shed and traditional steel pipe protective shed: The steel bar processing shed meets the safety production standardization requirements, with standardized assembly and installation, color matching, and structural safety, and can meet the standardization requirements. From the perspective of equipment and application, it has now achieved perceptual quality and can fully display standardization and operate well.

标准化：防护棚的标准化能够从工厂、产品定型化、标准化等方面得到充分体现。既能满意防护的基本要求，又能体现运用便利、布局规整、外观漂亮的特色。

Standardization: The standardization of protective sheds can be fully reflected in aspects such as factory, product standardization, and standardization. It can not only meet the basic requirements of safety protection, but also reflect the characteristics of convenient use, neat layout, and beautiful appearance.

1.高周转率：分解后易于卸载和堆积

1. High turnover rate: easy to unload and stack after decomposition

一次输入，可屡次运用，拆装后的结构件简略易操作，便于装卸、运送、堆积；装置简略便利。

One input, can be used multiple times, and the disassembled structural components are simple and easy to operate, making them easy to load, unload, transport, and stack; The device is simple and convenient.

2。减少现场出产和环境污染

2. Reduce on-site production and environmental pollution

由于运用工厂出产，避免了在施工现场进行切开，焊接和焊接的出产过程。该站点只能在装置后投入运用。这减少了出产造成的环境污染，反映了建筑业的现代化。绿色建筑开展的要求。高周转率避免了资料浪费，凸显了减排的特色。

Due to the use of factory production, the production process of cutting, welding, and welding at the construction site is avoided. This site can only be put into use after installation. This reduces environmental pollution caused by production and reflects the modernization of the construction industry. The requirements for the development of green buildings. The high turnover rate avoids data waste and highlights the characteristics of energy conservation and emission reduction.

三。与传统钢管防护棚的比照

III. Comparison with traditional steel pipe protective sheds

高周转率，少用钢；强定型，构件全体刚度高，有利于防护；任何组合，布局灵敏；受外力影响较小，不易变形；有很高的系数。装置简略，装置本钱低，可在许多方面下降施工本钱。

High turnover rate, using less steel; Strong shaping, high overall stiffness of components, beneficial for safety protection; Any combination, layout sensitive; Less affected by external forces and less prone to deformation; Has a high safety factor. The device is simple and has low installation costs, which can reduce construction costs in many ways.

4。低损耗、低保护本钱

4. Low loss, low protection cost

本实用新型操作保护简略，损失率低，运送、贮存、保护便利，机动性强。

This utility model has simple operation protection, low loss rate, convenient transportation, storage, and protection, and strong mobility.

装置运用特色

Characteristics of device application

1.组件小，重量轻：拆开和组装少，拆装便利，固定简略，装置便利。

1. Small components, light weight: less disassembly and assembly, convenient disassembly and assembly, simple fixation, and convenient installation.

2。布置灵敏，移动便利：可根据现场需要进行组装，也可由现场塔吊运地址。

2. Sensitive layout and convenient mobility: it can be assembled according to on-site needs or transported to the address by on-site tower crane.

3.为操作提供更多的作业空间：首要的承重部件是钢柱。柱子之间的空间很大，而且是无障碍的。棚内的物料加工具有较大的旋转半径，便于物料的搬运、出产和堆积。

3. Provide more workspace for operations: The primary load-bearing component is the steel column. The space between the pillars is large and unobstructed. The material processing inside the shed has a large rotation radius, which facilitates the handling, production, and stacking of materials.

本文来自：钢筋加工棚更多的内容请点击：http://www.jnpfjc.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来。

This article is from: Reinforcement Processing Shed. For more information, please click on: http://www.jnpfjc.com We will provide a satisfactory service for the questions you ask, and welcome you to come.