济南蓬发建材有限公司为您提供临边护栏、木工防护栏、工程围挡等相关信息发布和相关资讯,敬请关注!
联系我们
咨询电话
139 6412 5269

联系:张经理

手机: 139 6412 5269

邮箱: 394441862@qq.com

网址:http://www.jnpfjc.com/

地址:山东省济南市章丘圣井工业园

当前位置: 首页 > 新闻中心 > 行业动态 >

木工加工棚设规范以及搭建细节

来源:http://www.jnpfjc.com/   发布时间:2022-05-22

木工加工棚搭设规范:
Specification for erection of woodworking shed:
木工加工棚是施工现场内对木工进行拉直、弯曲、焊接等木工加工作业的一个场地。木工加工棚的长和宽,一般会根据木工加工数量和使用机械的多少确定加工棚的大小,一般情况有6*12m、9*12m、18*30m等几种,可以根据施工实际情况,自行设计长与宽尺寸。
Woodworking shed is a place for woodworking processing operations such as straightening, bending and welding on the construction site. The length and width of the wood processing shed are generally determined according to the number of wood processing and the number of machines used. Generally, there are 6 * 12M, 9 * 12M, 18 * 30m and other types. The length and width can be designed according to the actual construction situation.
木工加工棚工作台的布置也要合理,根据真实木工加工流程来,还有加工前原材料木工和加工结束后成品的存放,所以木工加工棚的地面应高于施工场地地面30cm,防止雨水浸泡,用脚手管进行搭设时,应有地横杆和斜撑,以保证加工棚的稳定性。
The layout of the worktable of the woodworking shed should also be reasonable. According to the real woodworking process, as well as the storage of raw materials before processing and finished products after processing, the ground of the woodworking shed should be 30cm higher than the ground of the construction site to prevent rainwater immersion. When erecting with scaffold pipes, there should be ground cross bars and diagonal braces to ensure the stability of the processing shed.
木工加工棚搭建细节:
Construction details of woodworking shed:
施工现场木工加工棚采用国际标准钢材制作,首先在现场利用扣件将多根钢管扣接搭设成加工棚的整体式钢结构,再设置斜撑和双层防砸结构,校验钢结构强度是否符合设计要求,后在栏杆上钩挂安全标语横幅,整个木工加工棚施工完毕标准化设计。全拼装式,快速组装,拆卸简单,方便运输,型材及配件规格可按需求来定制。
The woodworking shed on the construction site is made of international standard steel. Firstly, multiple steel pipes are buckled and erected into an integral steel structure of the processing shed by using fasteners on the site, and then diagonal braces and double-layer anti smashing structures are set to verify whether the strength of the steel structure meets the design requirements. Then, safety slogans and banners are hung on the railings, and the construction of the whole woodworking shed is standardized. Full assembly, quick assembly, simple disassembly, convenient transportation, profile and accessories specifications can be customized according to demand.
木工加工棚
1.一般情况下,木工加工棚都在塔吊的吊运范围内,否则木工吊动不方便,同时必须设置双层硬质防护,棚的具体尺寸要根据实际情况来定。
1. Generally, the woodworking shed is within the lifting range of the tower crane, otherwise it is inconvenient for the woodworking to lift. At the same time, double-layer hard protection must be set, and the specific size of the shed should be determined according to the actual situation.
2.防护棚的顶有二层的,上面的隔层上铺模板,下面一层铺二层竹芭片子。
2. If there are two layers on the top of the protective shed, the upper compartment is paved with formwork, and the lower layer is paved with two layers of bamboo sheets.
3.工具式木工加工棚需在醒目处挂操作规程图牌和安全宣传用语的横幅。
3. The tool type woodworking shed shall hang the operation specification drawing board and the banner of safety publicity language at the eye-catching place.
4.加工车间地面需硬化,宜选用砼地面。
4. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.
5.内部有灭火器、木工加工设备、有照明系统
5. There are fire extinguishers, woodworking equipment and lighting system inside
6.加工车间地面需硬化,宜选用砼地面。
6. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.
7. 南方地区,如遇台风应采取防风措施,可设置缆风绳。
7. In the south, in case of typhoon, windproof measures shall be taken, and wind ropes can be set.
建筑工地防护棚在工地中占据着不可或缺的地位,不仅是能够进行安全施工的重要保障,也是保护工地施工人员安全的基石,因此木工加工棚的搭建是建筑工作的重中之重。更多相关内容来网站www.jnpfjc.com咨询吧!
The construction site protective shed occupies an indispensable position in the construction site. It is not only an important guarantee for safe construction, but also the cornerstone to protect the safety of construction workers. Therefore, the construction of woodworking shed is the top priority of construction work. For more information, please visit www.jnpfjc.com Com consultation!