济南蓬发建材有限公司为您提供临边护栏、木工防护栏、工程围挡等相关信息发布和相关资讯,敬请关注!
新闻
联系我们
咨询电话
15866735826

联系:张经理

手机: 15866735826

邮箱: 394441862@qq.com

网址:http://www.jnpfjc.com/

地址:山东省济南市章丘圣井工业园

当前位置: 首页 > 新闻中心 > 行业动态

工地木工加工棚定制注意事项

来源:http://www.jnpfjc.com/   发布时间:2024-05-21

  1.一般情况下,钢筋加工棚都在塔吊的吊运范围内,否则钢筋吊动不方便,同时必须设置双层硬质防护,棚的具体尺寸要根据实际情况来定。

In general, the steel bar processing shed is within the lifting range of the tower crane, otherwise it is inconvenient to lift the steel bars. At the same time, double-layer hard protection must be set up, and the specific size of the shed should be determined according to the actual situation.

  2.防护棚的顶有二层的,.上面的隔层上铺模板,下面一层铺二层竹芭片子,二层之间间距500 毫米。

The top of the protective shed has two layers. The upper layer is covered with a template, and the lower layer is covered with two layers of bamboo strips, with a spacing of 500 millimeters between the two layers.

  3.工具式钢筋加工棚需在醒目处挂操作规程图牌和宣传用语的横幅,图牌的尺寸为:宽×高=2000毫米×1000毫米,横幅宽度宜为1米。

3. The tool type steel bar processing shed needs to hang operating procedure signs and safety propaganda slogans in prominent places. The size of the sign is: width x height=2000 mm x 1000 mm, and the width of the banner should be 1 meter.

  4.加工车间地面需硬化,宜选用砼地面。

4. The floor of the processing workshop needs to be hardened, and concrete floor should be selected.

220543198043643974

  5.内部有灭火器、钢筋加工设备、有照明系统

5. There are fire extinguishers, steel processing equipment, and lighting systems inside

  6.加工车间地面需硬化,宜选用砼地面。

6. The floor of the processing workshop needs to be hardened, and concrete floor should be selected.

  7. 南方地区,如遇台风应采取防风措施,可设置缆风绳。

7. In the southern region, if encountering a typhoon, windproof measures should be taken and cable wind ropes can be installed.

以上就是有关:木工加工棚 的介绍,想了解更多的内容请点击:http://www.jnpfjc.com 我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to the woodworking processing shed. To learn more, please click: http://www.jnpfjc.com We will wholeheartedly provide you with full score service. Welcome to call us!